How to install a CPU fan: Popular topics and installation guide for the entire network in the past 10 days
With the continuous upgrading of computer hardware, the issue of CPU cooling has become one of the hot topics among netizens recently. This article will combine the popular discussion contents of the entire network for the past 10 days to provide you with a detailed CPU fan installation guide and attach relevant hot data.
1. Hot topics related to CPU cooling in the past 10 days on the entire network
| Ranking | topic | Discussion volume | platform |
|---|---|---|---|
| 1 | What to do if the CPU temperature is too high | 152,000 | Zhihu |
| 2 | Recommended Best CPU Radiator in 2023 | 87,000 | B station |
| 3 | High temperature caused by wrong fan installation direction | 63,000 | Post it |
| 4 | Comparison of water-cooling vs air-cooling performance | 59,000 | |
| 5 | Silicone grease application tips | 48,000 | Tik Tok |
2. Detailed steps for installing CPU fan
1.Preparation
• Confirm CPU slot type (Intel LGA or AMD AM series)
• Prepare the right radiator and accessories
• Prepare thermal grease (some radiator pre-coated)
• Prepare tools such as Phillips screwdrivers
2.Clean the CPU surface
Clean the CPU metal top cover with lint-free cloth and alcohol to ensure that the surface is free of dust and old silicone grease.
3.Apply thermal silicone grease
| Apply method | Applicable scenarios | Things to note |
|---|---|---|
| Point coating method | Small size CPU | The diameter of the center point is about 5mm |
| Cross method | Medium and large size CPU | Line width is about 2mm |
| Scrape leveling method | Professional users | Keep the thickness uniform |
4.Install the radiator
• Intel platform: aligned with the main board heat dissipation hole position, press and fix it
• AMD platform: Use original buckles to fix it
• Pay attention to the direction of the radiator to ensure that the fan is facing the direction of the chassis exhaust
5.Connect to the power supply
Connect the fan power cord to the 4-pin connector marked "CPU_FAN" on the motherboard.
3. Frequently Asked Questions
| question | Solution |
|---|---|
| High fan noise | Check whether the installation is firm and adjust the BIOS fan curve |
| Too high temperature | Reinstall the radiator and check the silicone grease application |
| Cannot turn on | Check if the fan is connected to the correct interface |
| The radiator cannot be fixed | Confirm the installation direction of the back panel is correct |
4. Recent popular CPU radiator recommendations
| model | type | Applicable platform | Reference price |
|---|---|---|---|
| Cooler Supreme Hyper 212 | Air-cool | Intel/AMD | ¥199 |
| Jiuzhou Fengshen Xuanbing 400 | Air-cool | Intel/AMD | ¥89 |
| NZXT Kraken X63 | Water cooling | Intel/AMD | ¥999 |
| Limin PA120 | Air-cool | Intel/AMD | ¥219 |
5. Inspection matters after installation
1. Enter the BIOS to check whether the CPU temperature is normal (standard temperature is generally 30-50℃)
2. Run stress testing software (such as AIDA64) to observe temperature changes
3. Check whether the fan speed changes with the load
4. Confirm that the internal air duct of the chassis is unobstructed
Through the above steps, you should be able to successfully complete the installation of the CPU fan. If you encounter any problems, it is recommended to refer to the radiator instruction manual or consult a professional. The correct thermal solution can not only ensure CPU performance, but also extend the service life of the hardware.
check the details
check the details
en
